4 Installing an ODU AIM User’s Manual
45
Performing EIV Following ODU Installation
When you complete the alignment process for the ODU, the EIV AT ODU screen
appears. You can:
immediately perform Extended Installation Verification (EIV) on the ODU that
you just aligned. Follow the steps below.
if the installation includes two ODUs, you can press NEXT to return to the
SELECT ODU screen and align the other ODU.
press DONE to return to the HOME screen and perform EIV later. For
instructions, see “Performing EIV” on page47.
To perform the Extended Installation Verification (EIV) for the ODU that you just
aligned:
1 On the EIV AT ODU screen, press RUN EIV and wait briefly for the results.
To Next Page
Loading...