2 Setting Up the Meter AIM User’s Manual
27
4 Use c or d to highlight the item you want to change (Time Format, Date
Format, Time, or Date). Then press SELECT to go to the entry screen.
5 Use c or d to highlight the desired format setting, or use the numeric keypad
to enter the time or date. Then press SELECT to return to the TIME AND DATE
screen.
6 When you have finished changing time and date settings, press DONE to return
to the SETTINGS screen.
Note: When entering time or date, you can
press the Back button to delete a character. You
also can use e or f to navigate within your
entry, or press CLEAR to delete the entry and
start over. Press CANCEL to exit without saving
changes.
Tip: When entering the time, press AM or PM
as appropriate.
To Next Page
Loading...
Need help?
General
