Chapter 8
46
Overlapping Timers
OVERLAPPING
TIMERS
If you try to create event timers for overlapping programs, the receiver
displays a screen
with the dates and times of both programs. The receiver also displays this
screen if a
program time has changed, causing one timer to
overlap another. You must delete or edit
one of the timers.
TIPS
• It's very important to leave the receiver enabled to receive update
s. By doing this, the
receiver can have the latest software and Program Guide information.
Make sure the
Updates feature is enabled as described on page 66.
• If your VCR does not respond to the receiver’s commands, see if yo
u accidentally left
the protective film on the receiver’s front panel.
To Next Page
Loading...
