Chapter 5: Troubleshooting
Operation Manual: Evolution Series
THE TCS HEATER
IS CURRENTLY INITIALIZED.
This message is displayed when
selecting the 'TCS ACTIVE' button from
the manual mode wizard. This means
that the TCS has already been primed
and initialized.
Service
If you have a problem with the instrument or need parts information, contact the
Distek Service Department by e-mail at support@distekinc.com or call our toll-free
number (888)234-7835.
Items returned for repair or exchanges require an R.A. #. Please contact the
Distek Service Department to obtain an R.A.
Please send the return or repair to:
Distek, Inc.
Service Department
121 North Center Drive
North Brunswick, NJ 08902
Attention: R.A. # ___________
To Next Page
Loading...
