Chapter 1: Introduction
Operation Manual: Evolution Series
Environmental Considerations
Distek & the WEEE Directive (Waste Electrical & Electronic Equipment)
Distek, Inc. is committed to protecting the environment and
understands the importance of proper recycling. The “crossed
out wheelie bin” symbol on the product or on its packaging
indicates that this product must not be disposed of with domestic
household waste. Instead, it is the user’s responsibility to dispose
of their waste equipment by handing it over to a designated
collection point for the recycling of electrical and electronic
equipment waste. The separate collection and recycling of your
waste equipment at the time of disposal will help to conserve
natural resources and ensure that it is recycled in a manner that
protects human health and the environment.
For more information about where you can drop off your waste equipment for
recycling, please contact your local city office, your local distributor or Distek,
Inc.
Ambient Laboratory Temperatures
Distek recommends that the laboratory
temperature control system fans be kept on at all
times. This should improve set point control, and
minimize short-term excursion range.
Maximum Conditions:
1. To achieve the full range of controlled operation (30 to 45°C) within
specified tolerances the Evolution Dissolution System is designed to be
installed and operated in laboratories where the maximum operating
temperature does not exceed 25°C.
2. The maximum allowable ambient operation temperature is 30°C.
Operating environments above 25°C limit the range
for satisfactory operation of system to between 35
and 45°C.
To Next Page
Loading...
