Distek Evolution 6300 - Page 115

Appendix D: Sample Printouts from Parallel Printer
Operation Manual: Evolution Series
D
-
3
InstaPrint Sample
DISTEK EVOLUTION Rev. 1.20
4/02/03 01:41:19PM Page 1 of 1
InstaPrint for Method: PAD 900
(If Manual Mode: InstaPrint for Manual Mode)
--------------------------------------------------------------------
SERIAL NUMBER: 6105023
LOT NUMBER: _________
BATCH NUMBER: _________
START TEST AT: 11:48:27AM 04/02/03
TEST ENDED AT: In Progress (InstaPrint)
EXECUTED BY: DISTEK
PRINTED BY: DISTEK
TEST PARAMETERS
TEMPERATURE: 37.0 C IRPM: 250
DURATION: 0:10 IRPM DURATION: 0:03
RPM: 100 STAGGERED INTERVAL: 0 SECONDS
STIRRING TYPE: BASKET VESSELS ENABLED: 1 2 3 4 5 6
VESSEL VOL: 900 ml
SAMPLE LIST:
STEP TIME V1 V2 V3 V4 V5 V6 V7 RPM
1 000:00 36.88 36.91 36.91 36.88 36.89 36.86 36.96 100.0
2 000:15 36.88 36.86 36.91 36.90 36.84 36.83 36.91 100.0
TEMPERATURE PROFILES:
VESSEL NUMBER MAX. TEMP MIN. TEMP DELTA (MAX-MIN)
1 36.96 36.86 0.10
2 36.96 36.83 0.13
3 36.96 36.88 0.08
4 36.95 36.85 0.10
5 36.96 36.81 0.15
6 36.88 36.78 0.10
7 36.99 36.89 0.10
RPM RESULTS:
LAST MAX. RPM MIN. RPM DELTA(MAX-MIN)
RPM 100.0 100.0 99.8 0.2
IRPM PENDING
Note: Asterisk (*) in the Temperature Profiles denotes out of USP specification.