Chapter 1: Introduction
Operation Manual: Evolution Series
Evolution 6100
Bathless
Evolution 6300
Water Bath
Shaft Wobble Less than 0.010” (0.254mm)
Total Indicator Runout
Less than 0.010” (0.254mm)
Total Indicator Runout
Program Modes Manual
(Individual Vessel Control)
Manual
(Individual Vessel Control)
Automatic
(Up to 100 Pre-Programmed
Methods)
Automatic
(Up to 100 Pre-Programmed
Methods)
External
(produKEY™ Memory Device)
External
(produKEY™ Memory Device)
Interface Ports RS-232 (2), RS-485 (1),
Parallel Printer (1)
RS-232 (2), RS-485 (1),
Parallel Printer (1)
Construction
Materials
Cast Aluminum, Stainless
Steel, Acid resistant solid
state heating elements,
Engineered Plastics
Cast Aluminum, Stainless
Steel, 316 Stainless Steel
heating elements,
Engineered Plastics
Dimensions 26”(W) x 39”(H) x 20”(D)
(66cm x 99cm x 51cm)
26”(W) x 39”(H) x 20”(D)
(66cm x 99cm x 51cm)
TCS: 7" w x 16" h x 7" d
(18cm x 41 cm x 18 cm)
Weight 150 lb. (67.5 kg) 150 lb. (67.5 kg)
(Empty Water Bath)
TCS: 16 lb. (7.3 kg)
Electrical Power 115V ± 15V 50/60Hz 15A
or
230V ± 15V 50/60Hz 9A
(Operating voltage pre-set at
factory)
115V ± 15V 50/60Hz 3A
or
230V ± 15V 50/60Hz 3A
(Operating voltage pre-set at
factory)
TCS:
115V ± 15V 50/60Hz 8A
or
230V ± 15V 50/60Hz 5A
* Test Setting: Paddles, 900 mls, 50 RPM
To Next Page
Loading...
