Controls - 50 JT100/JT100 All Terrain Operator’s Manual
Right Control Console
Most engine display functions are self-explanatory. For more information about functions, see the
manufacturer’s instructions at www.fwmurphy.com.
4. Engine coolant
temperature gauge
Displays engine coolant
temperature.
Normal coolant temperature is 160°-
225° F (71°-107° C).
5. Engine oil pressure
gauge
Displays engine oil pressure. Full load reading should be 60-80 psi
(4.1-5.5 bar).
6. Main menu key Press from main screen
(gauges) to select main
menu.
7. Day/Night mode key Press from main screen
(gauges) to toggle between
day and night modes.
8. Voltmeter display Shows system voltage. Normal voltage is 13-14V with engine
running.
9. Diesel exhaust fluid
(DEF) gauge and
indicator
Displays amount of diesel
exhaust fluid (DEF) remaining
in tank.
• Indicator appears when level
reaches 10%.
• Indicator flashes yellow when
level reaches 5%.
• When level falls below 2.5%,
engine derates.
• When level reaches 0%, engine
begins secondary derate and
locks machine to low throttle after
30 minutes.
See “Diesel Exhaust Fluid (DEF)” on
page 195.
10. Fuel gauge Displays amount of fuel
remaining in tank.
See “Approved Fuel” on page 194.
Item Description Notes
To Next Page
Loading...
