JT40/JT40 All Terrain Operator’s Manual Prepare - 101
Check Supplies and Prepare Equipment
Check Supplies and Prepare Equipment
Check Supplies
• receiver/transmitter or tracker with spare batteries, if needed
• extra batteries for DrillLok
®
remote, if equipped
• extra batteries for wireless remote controller
• beacons with new and spare batteries
• two-way radios with new and spare batteries
• quick wrench (see page 169)
• transition sub
• anchoring equipment and accessories
• bits, screens, nozzles (see page 163)
• adapters, pipe, beacon housings
• marking flags or paint
• water and additional hoses
•fuel
• drilling fluid additives (see page 161)
•spare fuses
•keys
• backreamers, swivels, pulling devices (see page 166)
• wash down hose and spray gun
•duct tape
• spray lubricant
• tool joint compound (see page 202)
• electrically insulating boots and gloves. Boots must have high tops and meet the electric hazard
protection requirements of ASTM F2413 when tested at 18,000 volts. Tuck legs of pants completely
inside boots.
• personal protective equipment, such as hard hat and safety glasses
• notepad and pencil
To Next Page
