JT40/JT40 All Terrain Operator’s Manual Systems and Equipment - 149
Anchor System
Anchor System
The methods for anchoring this unit are available: anchors, alternate anchors, and a combination of both.
Choose the correct method based on jobsite conditions.
Crushing weight could cause death or serious injury. Use
proper procedures and equipment or stay away
274-204.
To help avoid injury:
• Set stabilizers prior to driving anchors.
• Drive anchors properly and/or tie off unit before drilling.
• Stand on platform when operating anchor controls.
• Wear high-top protective boots with legs of pants completely tucked inside.
• Wear protective gloves.
• Only swing cab after setup is complete.
• If you are not driving two anchors to full depth, drive optional ground rod into soil away from drilling
unit and connect ground rod to drilling unit.
Electric shock will cause death or serious injury. Stay
away.
274-049
Turning shaft can kill you or crush arm or leg. Stay away.
To help avoid injury: Do not replace anchor collar bolt with one longer than original. Clothing could
catch on turning shaft.
To Next Page
Loading...
