Ditch Witch JT40 - Controls; Wireline (Optional)

Controls - 74 JT40/JT40 All Terrain Operator’s Manual
Wireline (Optional)
Wireline (Optional)
Controls
1. Wireline restricted operating mode platform
switch
2. Wireline restricted operating mode switch
Item Description Notes
Wireline restricted
operating mode switch
To enable wireline restricted
operating mode, move
wireline restricted operating
mode platform switch (1) to
the upright position or press
top of wireline restricted
operating mode switch (2).
To disable wireline restricted
operating mode, move
wireline restricted operating
mode platform switch to the
downright position or press
bottom of wireline restricted
operating mode switch.
Green light will indicate when wireline
restricted operating mode is active.
IMPORTANT: Wireline restricted
operating mode is enabled after
wireline restricted operating mode
switch is turned ON or wireline
operator mode platform switch is in
the upright position.
For more information, see “Wireline
Operation” on page 188
2
1
c00ic133w.eps