Systems and Equipment - 158 JT40/JT40 All Terrain Operator’s Manual
Drilling Fluid
Drilling Fluid
For productive drilling and equipment protection, use these recommended Baroid
®
products, available
from your Ditch Witch
®
dealer.
• Soda ash
• Quik-Gel
®
dry powder bentonite (p/n 259-804)
•EZ-Mud
®
liquid polymer (p/n 259-805)
• Liqui-Trol™ liquid polymer suspension (p/n 259-808)
•Quik-Trol
®
dry powder polymer (p/n 259-809)
• Bore-Gel
®
drilling fluid (p/n 259-807)
•Con Det
®
water-soluble cleaning solution (p/n 259-810)
Guidelines
Match drilling fluid to soil type. This chart is meant as a guideline only. See your local dealer for soil
conditions and drilling fluid recommendations for your area.
Polymer
This drilling fluid additive provides excellent lubrication and increases viscosity in average soils and heavy
clay. In swelling clay, polymer can reduce swelling that traps pipe in the bore.
There are two types of polymer:
• long chain such as Baroid EZ-Mud
• medium chain such as Baroid Quik-Trol
Improper handling or use of chemicals may result in illness, injury, or
equipment damage. Follow instructions on labels and in material safety data sheets
(MSDS).
Soil type Drilling fluid recommendation
smooth, flowing sand bentonite or Bore-Gel + medium chain polymer
coarse sand or light soil bentonite or Bore-Gel
heavy clay long chain polymer + Con Det
swelling clay long chain polymer + Con Det
rock Bore-Gel
To Next Page
