JT40/JT40 All Terrain Operator’s Manual Systems and Equipment - 187
Cruise Control
Adjust Settings
Override
• To override thrust/pullback settings, move joystick out of neutral and beyond current setting. Unit will
increase to joystick setting.
• To return to previous setting, release joystick.
Disengage
To disengage cruise control, move joystick out of neutral in opposite direction of carriage travel. Cruise
mode indicator disappears from the upper display and carriage stops moving.
Resume
1. Position joystick out of neutral in direction to be resumed (forward or
backward).
2. Press resume. Thrust and rotation resume at the previous settings and cruise
mode indicator appears on upper display. See “Cruise mode indicator” on
page 51.
Setting Instructions
Thrust or Pullback • To increase thrust or pullback speed, set joystick in neutral position and
press resume.
• To decrease thrust or pullback speed, set joystick in neutral position and
press set.
Rotation • To increase rotation speed, move joystick to left and press resume.
• To decrease rotation speed, move joystick to left and press set.
Note: To obtain fine adjustments, press and hold the multi-use button while making the adjustment.
RESUME /
SET /
c00ic113h.eps
To Next Page
Loading...
