JT40/JT40 All Terrain Operator’s Manual Prepare - 105
Check Supplies and Prepare Equipment
Assemble Accessories
Fire Extinguisher
Identify location (shown) for fire extinguisher. Mount a fire extinguisher near the power unit but away from
possible points of ignition. The fire extinguisher should always be classified for both oil and electric fires. It
should meet legal and regulatory requirements.
Covers and Canopy (Open Station Only)
1. Remove canopy from storage position under
console cover.
2. Remove fiberglass rod from storage position
and slide through front pocket of canopy.
3. Insert fiberglass rod into top of operator station
grab rails (shown).
To Next Page
Loading...
