JT40/JT40 All Terrain Operator’s Manual Controls - 67
Cab (Optional)
Seat
1. Heat switch
2. Lumbar lever
3. Slide control
4. Suspension control
5. EDT diagnostic port, cab controller
6. Recline control
Item Description Notes
1. Heat switch To turn seat heat on high,
press top.
To turn lumbar heat off, press
middle.
To turn seat heat on low,
press bottom.
2. Lumbar lever Push lever down to engage
lumbar support.
Push lever up to disengage
lumbar support.
To Next Page
Loading...
