Service - 218 JT40/JT40 All Terrain Operator’s Manual
50 Hour
Check SaverLok Torque
Check SaverLok torque every 50 hours.
To check:
1. Start unit and position carriage so that collar
can be clamped in rear wrenches.
2. Clamp wrenches on collar and tighten
SaverLok assembly until outer rotation
pressure gauge reads 4500-5000 psi (310-345
bar) in low speed setting. See “Outer rotation
pressure gauge” on page 53.
j59om118w.eps
To Next Page
Loading...
