JT40/JT40 All Terrain Operator’s Manual Controls - 29
Set-Up Console
Multifunction Joystick (Left) Modes
Item Description Notes
1. Dual joystick ground
drive control
To move right track forward,
move lever forward.
To move right track backward,
move lever back.
• Operator presence switch must
be pressed and operator seat
must be empty for control to work.
• See “Steer Unit” on page 108 for
more information.
2. Left stabilizer control To raise, push up.
To lower, pull down.
IMPORTANT: Lower left and right
stabilizers to the ground together,
then adjust individually.
3. Front frame tilt control To raise, push up.
To lower, push down.
IMPORTANT: To ensure a stable
platform for drilling, use front and
back tilt controls together to set frame
at desired pitch without raising tracks
off the ground.
4. Left anchor dual
joystick control
To rotate counterclockwise,
push up.
To rotate clockwise, push
down.
To Next Page
Loading...
