JT40/JT40 All Terrain Operator’s Manual Controls - 71
Engine Compartment
7. DrillLok
®
key
To allow tracker operator to
stop thrust and rotation, move
key to enable position (up).
To override DrillLok mode,
move key to override position
(right).
IMPORTANT: Remove key and keep
in tracker operator’s possession.
• Top icon is shown when operating
with Subsite
®
Electronics tracker.
• Bottom icon is shown when
operating without Subsite
Electronics tracker.
8. Hydraulic fluid and
temperature sightglass
Displays hydraulic fluid level
and temperature.
Normal coolant temperature is less
than 175° F (79° C).
Item Description Notes
c00ic122w.eps
To Next Page
Loading...
