2
EN
IP2348EN
Contents
Legenda
i
This symbol indicates instructions or notes regarding safety, to which special atten-
tion must be paid.
This symbol indicates useful information for the correct functioning of the product.
Subject Page
1. General safety precautions 3
Declaration of incorporation of partly completed machinery 4
2. Technical data 5
3. Standard installation 6
4. Main components 7
5. Installing the automation
8
5.1 Installing / Removing the cover 8
5.2 Installation/removal of the cover if installed side presence sensor 8
5.3 Removing the front casing 9
5.4 Rear operator installation 9
5.5 Front operator installation 10
5.6 Installation examples using supplied wing anchoring brackets 10
5.7 Installing / Removing the cover 11
6. Example of box fastening 13
6.1 Examples with wing connection bracket DASTAC16 13
6.2 Example with wing connection bracket DAST30 14
6.3 Example with wing connection bracket DASTAC 14
7. Preparation of the glass door wing 16
7.1 Installing and adjusting the door wings 17
7.2 Floor guide installation 20
7.3 Belt stop installation 20
7.4 Checking and adjusting the belt tension 21
7.5 Sensor positioning on the cover 21
7.6 External sensor cable fixing 21
8. Electrical connections 22
8.1 Standard electrical connections 23
8.2 Control panel commands 25
8.2.1 Commands 25
8.3 DAS902MP plus module (optional) 27
8.4 DAS902MP commands 28
9. Adjustment and selection of control functions 30
9.1 Display test 31
9.2 Status indication on the display 31
10. Start up 32
11. Parameters 35
11.1 Configuration parameters according to function 35
11.2 Main control board parameters 38
12. Example of connection 49
12.1 Combined opening and safety sensor + safety sensor on opening 49
12.2 Interconnection of operators 51
12.2.1 Interconnection cable 51
12.2.2 Hardware configuration for interconnection 51
12.2.3 Parameter configuration for interconnection 52
12.3 Operation mode selector (OMS) functionality 52
12.4 Synchronization 53
12.5 Interlock 53
13. Troubleshooting 55
13.1 Active error indication 56
14. Routine maintenance plan 60
To Next Page
Loading...
