DITEC LCU40H User Manual

2
IP2246EN
EN
Contents
Subject Page
1. General safety precautions 3
1.1 Safety functions 4
2. EC Declaration of Conformity 4
3. Technical specifications 4
3.1 Applications 4
4. Installation and electrical connections 5
4.1 Maintenance 7
4.2 Standard installation 7
4.3 Standard installation diagram 8
5. Programming 9
5.1 Switching the display ON and OFF 9
5.2 Navigation keys 9
5.3 Menu map 10
6. Quick start-up sequences 12
6.1 Selection of automation type 12
6.2 Configuration of the number of gate wings 12
6.3 Enabling the configurations 12
6.4 Adding remote controls 12
6.5 Configuration of the limit switches 13
6.6 Configuration of the safety devices 13
7. Application examples 14
7.1 Automations with two swinging gates 14
7.2 Automations with one swinging gate wing 14
7.3 Up-and-over doors with two parallel motors 15
8. Commands 16
8.1 Inserting plug-in boards (AUX) 17
8.2 SOFA1-SOFA2 or GOPAVRS self-controlled safety edge 17
9. Outputs and accessories 18
10. Selections 19
11. Adjustments 20
11.1 Main menu 20
11.2 Second level menu - AT (Automatic Configurations) 21
11.2.1 Selecting the type of automation AT → AS and specific default settings 22
11.3 Second level menu - BC (Basic Configurations) 23
11.3.1 Additional BC level parameters that can be configured (available with AT → AA enabled) 23
11.4 Second level menu - BA (Basic Adjustment) 24
11.4.1 Additional BA level parameters that can be configured (available with AT → AA enabled) 26
11.5 Second level menu - RO (Radio Operations) 28
11.5.1 Additional RO level parameters that can be configured (available with AT → AA enabled) 29
11.6 Second level menu - SF (Special Functions) 30
11.6.1 Additional SF level parameters that can be configured (available with AT → AA enabled) 31
11.7 Second level menu - CC (Cycle Counter) 32
11.7.1 Additional CC level parameters that can be configured (available with AT → AA enabled) 33
11.8 Second level menu - EM (Energy Management) 33
11.8.1 Additional EM level parameters that can be configured (available with AT → AA enabled) 34
11.9 Second level menu - AP (Advanced Parameters) 34
11.9.1 Additional AP level parameters that can be configured (available with AT → AA enabled) 36
12. Diagnostics 38
12.1 Data Logging integrated in the board 38
12.1.1 Alarm counter 38
12.1.2 Alarm log 38
12.1.3 Exporting information on the microSD 39
12.2 Extended data logging on microSD
39
13. Signals visualised on the display 40
13.1
Display of automation status
40
13.2
Display of safety devices and commands
40
13.3
Visualisation of alarms and faults
42
14. Troubleshooting 45
Key
This symbol indicates useful information for the correct functioning of the product.
Factory settings
This symbol indicates instructions or notes regarding safety, to which special attention must be paid.

DITEC LCU40H Specifications

General

Brand	DITEC
Model	LCU40H
Category	Control Systems
Language	English