10
©
2018 DJI All Rights Reserved.
Phantom 4 RTK User Manual
Remote Controller Overview
1. Antennas
Relays aircraft control signals.
2. Display Device
Android-based to run the DJI MG app.
3. Speaker
Audio output.
4. Control Sticks
Controls aircraft movement. Can be set to
Mode 1, Mode 2, or a custom mode.
5. Lanyard Attachment
Used to attach the remote controller lanyard.
6. Power Button
Used to turn the remote controller on and o.
7. Status LED
Indicates whether the remote controller is linked
to the aircraft.
8. USB-C Port
Connects to a computer via a USB-C cable
for conguration. Connects to the aircraft via a
USB-C OTG cable and a Micro USB cable for
aircraft rmware update.
9. 3.5 mm Audio Jack
Used to connect audio input/output devices.
10. Battery Level LEDs
Displays current battery level.
11. MicroSD Card Slot
Provides display device with up to 128 GB of
extra storage.
12. RTH Status LED
Circular LED around the RTH button. Displays
RTH status.
13. RTH Button
Press and hold this button to initiate Return to
Home (RTH).
14. Gimbal Dial
Use this dial to control the tilt of the gimbal.
15. Video Recording Button
Press to start recording video. Press again to
stop recording.
16. Pause Switch
During a Photogrammetry or Waypoint operation,
toggle to pause the operation.
During RTH, toggle to pause RTH.
17. Sleep/Wake Button
Press to sleep/wake the screen; press and hold
to restart.
18. Shutter Button
Press to take a photo.
19. Reserved Button
20. Aircraft Control Switch Dial
Turn and press the dial to switch among
the aircraft when using Multi-Aircraft Control
function.
1
2
3
4
5
6
7
8
10
11
12
13
16
9
17
18
19
20
15
14
To Next Page
Loading...
Need help?
General
Weight and Dimensions
