DMP Electronics XR150FC User Manual

32 XR Fire Control Panel User Guide | Digital Monitoring Products, Inc.
User Profiles Reference
MENU DISPLAY PRIVILEGE
ARM NO YES Arm
DIS NO YES Disarm
ALM SLNC NO YES Alarm Silence
SNSR RST NO YES Sensor Reset
LOCKDOWN NO YES Lockdown
DOOR LOCK/
UNLOCK
NO YES Door Lock/Unlock
DOOR ACS NO YES Door Access
ARM AREA NO YES Armed Areas
OUTPUTS NO YES Outputs ON/OFF
FAVORITES F01 - F20 Favorites
ZN STATS NO YES Zone Status
BYPAS ZN NO YES Bypass Zones
ZONE MON NO YES Zone Monitor
SYS STAT NO YES System Status
SYS TEST NO YES System Test
MENU DISPLAY PRIVILEGE
PROFILES NO YES User Profiles
USR CODE NO YES User Codes
SCHEDULS NO YES Schedules
TIME NO YES Time
DIS EVNT NO YES Display Events
SERV REQ NO YES Service Request
FIRE DRILL NO YES Fire Drill
EXTEND NO YES Extend Schedules
TEMP CODE NO YES
Temporary User
Code
ANTI PASS NO YES Anti-Passback
ACCESS
SCHEDULES
Sch. 1-99
Allow: Shift/Time
Access
RE ARM DLY 0 – 720 Re-Arm Delay
SEC
LANGUAGE
NO YES Preferred Language
Changing User Profiles
1. Access the User Menu. Press COMMAND until USER PROFILES? displays.
2. Press any Select Key. The keypad displays ADDDELCHG.
3. Press the far right Select Key, under CHG.

DMP Electronics XR150FC Specifications

General

Brand	DMP Electronics
Model	XR150FC
Category	Control Panel
Language	English