DMP Electronics XR150FC - Page 53

Digital Monitoring Products, Inc. | XR Fire Control Panel User Guide 47
5. The keypad displays A - : AM PM.
Note: After selecting the schedule, the keypad displays any current
times previously set for that holiday. This feature allows you to review
the programmed times.
6. If times display, the keypad then displays DELETE KEEP. Select DELETE to
enter new times.
7. The keypad then displays BEGINTIME? This is followed by the display AM
PM.
Enter a new time and select AM or PM.
The display changes to END TIME?. This is followed by the display AMPM.
Enter a new time. Enter all schedule times using a 12 hour clock. For
example, to enter 6 AM you would enter 0 + 6 + 0 + 0 select AM. For 11 PM
you would enter 1 + 1 + 0 + 0 and select PM.
8. The keypad returns to HOL:ABC allowing you to enter A, B, and/or C
holiday schedule for the same Output or Door. Go back to step 3 to add
additional holiday schedules.