DMP Electronics XT Series User Manual

20 XT30 and XT50 User Guide | Digital Monitoring Products, Inc.
1. Press the CMD key until MENU?NOYES displays.
2. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to OUTPUTS
ON/OFF?.
3. At this display, press any Select Key or Area. The keypad displays OUTPUT:-ONOFF.
4. Press any select key or area.
5. Enter the output number, then select ON or OFF.
Outputs On/O
Activating a Favorite
1. Press the CMD key until MENU?NOYES displays.
2. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to FAVORITES?.
3. At this display, press any Select Key or Area. The keypad displays FAVORITE.
4. Enter a Favorite number from 1-20. Pressing CMD activates the Favorite.
Favorite
Adding a Favorite
1. Press the CMD key until MENU?NOYES displays.
2. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to
ZWAVESETUP?.
3. At ZWAVESETUP?, press any select key or area. The keypad displays ADDLISTREMOVE.
4. Press CMD again to display FAV XFER OPT. Select FAV and FAVORITE NUMBER is displayed.
5. Enter a Favorite number between 1 and 20 and press CMD. If the Favorite number entered is unassigned,
*UNUSED* displays. If the Favorite is already assigned, you may change the name or press the back arrow
and enter a new number.
6. Press any select key or area and a cursor displays. Enter a Favorite name up to 16 characters. To remove a
Favorite, press CMD without entering a name.
7. Press CMD to save the Favorite and the Favorite name and ADDEDITREMOVE displays.

DMP Electronics XT Series Specifications

General

Brand	DMP Electronics
Model	XT Series
Category	Control Panel
Language	English