Digital Monitoring Products, Inc. | XT30 and XT50 User Guide 25
Use WPS to Connect Your System
1. Press the WPS button on the Wi-Fi network router to start the pairing operation.
2. Press the CMD key until MENU?NOYES displays.
3. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to WIFISETUP?.
4. Press any Select Key or Area. The keypad displays WPSLISTMANUAL.
5. Select WPS. When WPS is successful, CONNECTED displays. If WPS is unsuccessful,
WPSFAILEDRETRY?NOYES displays. Press YES to retry. Press NO and WPS LIST MANUAL displays.
List the Available Networks
1. At the WPSLISTMANUAL display, select LIST and SEARCHING displays.
2. Press CMD to view the available Wi-Fi networks.
3. When the desired network displays, press any select key or area to connect. W/L KEY:****************
displays.
4. If the system is unable to detect the security type, press any select key or area on the keypad and WEP
WPA NONE displays. Select the desired security type and enter your network password.
Manually Connect Your System
1. At the WPSLISTMANUAL display, select MANUAL.
2. Enter the name of your Wi-Fi network and press CMD. W/L KEY:**************** displays.
3. If the system is unable to detect the security type, press any select key or area on the keypad and WEP
WPA NONE display. Select the desired security type then enter your network password.
Test the Network Connection
1. Select TEST. When the test is successful, CONNECTED displays. If the test is unsuccessful, NOT
CONNECTED displays.
2. Press CMD to return to WIFISETUP?.
Wi-Fi Setup
To Next Page
Loading...
Need help?
General
