26 XT30 and XT50 User Guide | Digital Monitoring Products, Inc.
1. Press the CMD key until MENU?NOYES displays.
2. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to BYPASS
ZONES?.
3. Press any Select Key or Area. The keypad displays ZONE - RST BYPS.
• To reset a zone, enter the zone number and select RST. Confirmation will be given when the zone is
reset.
• To bypass a zone, enter the zone number and select BYPS. Confirmation will be given when the zone
is bypassed.
Bypass Zones
1. Press the CMD key until MENU?NOYES displays.
2. Select YES. The keypad displays ENTER CODE. Enter your user code. Press CMD to scroll to
ZONEMONITOR?.
3. Press any Select Key or Area. The keypad displays PERIM ALL NBR.
4. Select PERIM to place all perimeter zones into Zone Monitor.
4a. The keypad displays PERIM? ADD RMV.
4b. Select ADD to add all perimeter zones to Zone Monitor.
4c. Select RMV to remove all perimeter zones.
5. Select ALL to place all zones into Zone Monitor.
5a. The keypad displays ALL?ADDRMV.
5b. Select ADD to add all Night and Exit zones to Zone Monitor.
5c. Select RMV to remove all Night and Exit zones.
6. Select NBR to enter a specific zone number for zone monitor.
7. If NBR is selected, the keypad displays ZONE : - ADD RMV.
7a. Enter any zone number and select ADD to add this zone.
7b. Enter any zone number and select RMV to remove the zone.
8. The zone number automatically disappears and a new zone number can then be entered. See step 7.
Zone Monitor (Chime)
To Next Page
Loading...
Need help?
General
