28 XT30 and XT50 User Guide | Digital Monitoring Products, Inc.
There are three characteristics associated with each user code that define its capabilities within the system.
CHARACTERISTIC EXAMPLE
User Number 22
User Code 3848
Authority Level Master
User Number
Each user is numbered from 1 to 30 in an XT30 or 1 to 99 in an XT50 panel. This number identifies them to the system
and can be transmitted to the central station when they arm or disarm the system.
User Code
Users also have a 4-digit user code they enter into the keypad when arming or disarming. This user code is kept secret
from other users and is not transmitted to the central station when they arm or disarm. Users enter only their own user
code when operating the system.
User Names
Each code may also be programmed with the user name. You may enter up to 16 characters for the name. The user
is also assigned a level of authority (Master, Standard, Limited, or Scheduled) by the person administrating the
system to determine the functions the user can access. The XT30 allows Master and Standard users while the XT50
allows all levels of authority.
The Scheduled authority level only functions during a valid schedule, except for arming which can be done at any
time. Disarming is allowed outside of a schedule, but an UNAUTHORIZED ENTRY message is sent to the central
station. All other authority levels function regardless of schedules.
The next table lists system functions users are allowed to access based on the authority level assigned to their
codes at the time they are added to the system.
User Codes
To Next Page
Loading...
Need help?
General
