DMS AS/400 - Controllers Status; Devices Status

AS/400 User Guide
• Using F10=Display Associated Devices will list all devices associated with a particular
line and also the type of those devices.
Back to Top
Controllers Status
Steps:
To display status of controllers:
1. Type "WRKCFGSTS *CTL" on command line and press ENTER key
OR
• From Communication Status, select option 2
From this screen you can work with the controllers in a variety of ways.
• You can vary on and off, work with jobs or with controller descriptions.
• Use F14=Work with Controllers to change, copy, delete, display or create new
controllers.
• Use F23=More Options to hold devices, end recovery, release devices, resume
recovery or display communications status.
• Use F10=Display Associated Devices to list all devices and lines associated with a
particular controller and also the type of those devices.
Back to Top
Devices Status
Steps:
To display status of devices:
1. Type "WRKCFGSTS *DEV" on command line and press ENTER key.
OR
64 DMS Systems Corp.
October 13, 2003
Version 1.0