40
Before using the terminal
Initial settings
When you turn on the terminal for the first time or after performing
“Factory data reset” (P. 81), Wi-Fi and docomo services initial settings
screen appears.
1
When a confirmation screen for Wi-Fi settings
appears, “はい(Yes)”
Available access points are automatically detected and listed.
·
Tap “(No)”, to skip Wi-Fi settings. Operate from step 4.
2
Tap an access point to connect to
When you connect a secured access point, enter password and then
tap “(Connect)”.
3
4
In the docomo services initial settings screen, “進む
(Next)”
·
Follow onscreen instructions to set a “
(docomo apps password)”.
5
“OK”
■ Information
·
If an operation guide is displayed, read the information and tap “
(Do not show this again)” or “OK”.
·
See “Using Wi-Fi function” (P. 66) for details on Wi-Fi function.
Setting Google account
Setting up a Google account allows you to use online services provided
by Google such as Gmail and Google Play.
·
Wi-Fi must be configured beforehand.
1
From the Home screen, → “基本機能/設定 (Basic
Functions/Settings)” → “Settings”
2
“Add account” → “Google”
For subsequent operations, follow onscreen instructions.
To Next Page
Loading...