87
File management
Bluetooth communication
Send and receive data between the terminal and Bluetooth device.
·
Note that connecting Bluetooth makes battery consumption increased.
·
For the compatible versions or profiles, see “Main specifications” (P. 124).
·
For operations of Bluetooth device to be connected to the terminal, refer to
the device’s instruction manual.
·
Connection and operation availability with all commercial available
Bluetooth devices is not guaranteed.
■ Notes on using Bluetooth function
·
Connect with another Bluetooth device keeping the line-of-sight distance to
10 m or shorter. Distance available for connection may be shorter
depending on surrounding (wall, furniture, etc.) and structures of buildings.
·
Place a Bluetooth device as far as possible from other devices (electric
appliances, audio-video equipment, office automation equipment, etc.).
Especially when using micr
owave oven, it may affect the terminal.
Connection may not be established correctly, or noises on TV or radio may
be generated.
·
When there is a broadcasting station or wireless device nearby and
surrounding radio wave is strong, the terminal may not be connected
correctly.
·
Radio wave emitted from Bluetooth devices may affect operations of
medical electronics etc. Turn off the terminal and nearby Bluetooth devices
in place such as train, airplane, hospital, place near automatic door or
fire-alarm box, where flammable gas is generated such as gas station
because it may cause an accident.
·
You can connect Bluetooth device wirelessly even in a bag or pocket.
However, blocking between Bluetooth device and the terminal by body may
make the communication speed lower or cause noise.
■ Radio wave interference with wireless LAN
Because a Bluetooth device and wireless LAN (IEEE802.11b/g/n) use
the same frequency band (2.4 GHz), if the device is used near a device
with wireless LAN capability, radio wave interference may occur, and
communication speed may be reduced, noise may occur, or connection
may not be established. In these cases, do the following:
·
Keep the terminal 10 or more meters away from wireless LAN devices.
·
Within 10 m, turn off wireless LAN devices.
Turning ON Bluetooth function
1
From the Home screen, → “基本機能/設定 (Basic
Functions/Settings)” → “Settings”
2
Tap “OFF” in the “Bluetooth” field to switch “ON”
appears on the status bar.
Making the terminal visible
1
From the Home screen, → “基本機能/設定 (Basic
Functions/Settings)” → “Settings”
2
“Bluetooth”
Bluetooth setting screen appears.
3
“dtab01”
“Visible to all nearby Bluetooth devices” appears under “dtab01” and
countdown starts. After 2 minutes have passed, the terminal becomes
invisible.
·
Tap “Visibility timeout” to set time period for being visible.
Renaming the terminal
Change the terminal name shown on other Bluetooth devices screens.
1
On the Bluetooth setting screen, → “Rename tablet”
2
Enter the terminal name → “Rename”
To Next Page
Loading...