88
File management
Pairing/connecting
Pair/Connect the terminal with other Bluetooth device to enable data
communication.
Pairing/Connecting with other Bluetooth device
1
On the Bluetooth setting screen, “SEARCH FOR
DEVICES”
Scanned devices are listed in the “Available devices” field.
2
Tap a device to pair/connect
3
Follow the onscreen instructions to pair/connect
Paired/Connected device name appears in the “Paired devices” field.
·
Enter Bluetooth pass key (authentication code), if required. Entering
the same pass key on the both devices which exchange data is
required. For Bluetooth pass key, refer to the instruction manual of
the device.
Unpairing/Disconnecting
1
Perform canceling operation on the Bluetooth setting
screen
■ Unpairing Bluetooth device
on the device name in “Paired devices”
“Unpair”
■ Disconnecting Bluetooth device
Tap the device name in “Paired devices”
“OK”
■ Information
·
For some devices, tap to rename and change profile setting.
Sending/receiving data
·
Turn Bluetooth function of the terminal ON and pair receiver’s device
beforehand.
Receiving data
1
Send data from the other party’s device
2
When appears on the status bar, open the
notification panel → “Bluetooth share:Incoming file”
3
On the “File transfer” screen, “Accept”
Data communication starts.
When data is received,
appears on the status bar.
■ Information
·
To view received file, open the notification panel “Bluetooth share:
Received files” Tap the file or
on the Bluetooth setting screen Tap
“Show received files”.
Sending data
You can send data such as Phonebook entries, still images, videos to
another Bluetooth device.
1
From menu of applications, “Bluetooth”
2
Tap receiver’s device
Data communication starts.
When data is sent,
appears on the status bar.
To Next Page
Loading...