DOD CLPX - Chapter 1 - Overview; 1.1 Introduction; 1.2 Sampling and Monitoring; 1.3 Flow

C L P X
U S E R S G U I D E
D O D T E C H N O L O G I E S , I
N C
Rev 12.109 Page 2
IMPORTANT
ELECTRICAL HAZARD
The CLPX may only be serviced by trained service
personnel. Contact the manufacturer for more information
.
Be sure to read this manual in its entirety before installing and operating the CLPX. Contact
the manufacturer with any questions regarding the installation or use of the CLPX.
Chapter 1 - Overview
1.1 Introduction
The DOD Technologies CLPX portable gas monitor is an analytical instrument designed to measure
low concentrations of a specific toxic gas or a specific range of related toxic gases or vapors. This
equipment is intended to be used as part of a defined air quality management program.
The CLPX uses DOD Technologies ChemLogic colorimetric technology for fast and accurate gas
detection. The CLPX provides a fast response to a wide range of gases. It was designed for maximum
uptime, so routine maintenance and service can be performed quickly and easily.
1.2 Sampling and Monitoring
The system draws sample flow through the inlet on the front of the unit and through the ChemLogic
tape.
1.3 Flow
An optional kit allows a short exhaust tube to be used with the CLPX unit. Contact DOD for more
information.
IMPORTANT
:
Use only ChemLogic cassettes labeled for use with CLPX.
IMPORTANT : Read Appendix G before handling ChemLogic Cassettes.