INSTALLATION
(1) Position the ambient temperature sensor onto
the radiator yoke.
(2) Install and tighten the one screw that secures
the ambient temperature sensor bracket to the radi-
ator yoke. Tighten the screw to 5.6 N·m (50 in. lbs.).
(3) Reconnect the wire harness connector to the
ambient temperature sensor connector receptacle.
(4) Reconnect the battery negative cable.
SPECIAL TOOLS
OVERHEAD CONSOLE SYSTEMS
Degaussing Tool 6029
8V - 14 OVERHEAD CONSOLE SYSTEMS DN
REMOVAL AND INSTALLATION (Continued)
To Next Page