ParaMon-Pro X instruction manual DOC.60391-01/21
8.2.4 Angle after torque up
After ‘torque-up’ is sensed, an additional action can be set if necessary.
After ‘torque-up’ is detected, it rotates at ____ speed by ___ angle in ___ direction.
E.g.
Screws are not fastened completely for next processing.
If needed to maintain a certain degree of fastening, it is able to keep the degree of fastening constant by spinning them
reversely by 2 turns (720°) after torque-up detection.
To Next Page
Loading...
