DOGA BM Series - 1 Information; Important; Product Reference; Product Description

ParaMon-Pro X instruction manual DOC.60391-01/21
6
1. INFORMATION
1.1 IMPORTANT
The tool supplied with this manual may have been altered to meet specific needs.
If this is the case, when ordering a renewal or spare parts, please indicate the tool item code featured on the delivery
document, or contact DOGA at +33 1 30 66 41 41 indicating the approximate delivery date. You will then be sure to
get the required tool and/or parts.
1.2 Product reference
Description
BM series controller
Type
ParaMon-Pro X
1.3 Product description
ParaMon-Pro X offers diverse features to help users use the BM tool more efficiently..
The features of ParaMon-Pro X are as follows:
Dual-band (2.4 & 5GHz) WiFi, AP-mode only
Able to connect up to 8 BM/MD tools
Able to check and change parameter settings
Displays fastening data in real time and saves them automatically
Directly programs and visualizes assembly procedures
Realtime graph monitoring (torque, speed, angle…)
Remote tool control
I/O port (input x 16 / output x 16)
External display extension (HDMI)
Supports barcode scanner
Supports File Transfer Protocol (FTP) server
Backup / restore