DOGA BM Series - Fastening Step

ParaMon-Pro X instruction manual DOC.60391-01/21
94
14.1.1 Fastening step
No.
Description
1
Displays the tool name and preset information in the fastening step.
2
Reveals the last scanned code information; the code is actually recorded in the log.
3
Shows a screw count according to the screw count direction settings.
4
Reveals a total number of screws according to the screw count unit settings.
5
Shows torque in ‘actual torque’ or ‘target torque’ format.
6
Displays an error code and error details in the event of ‘NG’.