Maintenance Section
-164-
Inching & Braking Control Shaft -
Lubricate
Lubricate three fittings for the inching and brake
pedal control shaft.
Horn and Lights (If Equipped) -
Check
Press horn button, to determine if horn is operational.
Check and replace all defective gauges.
Check all lights such as warning, directional, backup,
driving and flood lights for correct operation. Replace
all burned out bulbs.
Have repairs made if needed.
Fuel Filter (DM02VA/P Engine with
Main Filter only) - Change
The fuel filter element must be replaced on a regular
basis to prevent foreign materials from entering the
diesel fuel system.
1. Stop and cool down the engine.
2. Disconnect wire harness connector (1) and
disconnect the fuel hose (2) connected to the
fuel pre filter port.
3. When removing the fuel filter, hold it carefully to
prevent fuel from flowing out. Wipe and clean
spilled fuel.
4. Install a new fuel filter and assemble the fuel
filter ap.
5. Connect the wire harness connector and fuel
hose connector. When connecting the fuel hose,
take care to prevent foreign material from
entering the hose.
6. Disconnect wire harness connector (3) and
disconnect the fuel hose (4) connected to the
fuel main filter port.
7. When removing the fuel filter, hold it carefully to
prevent fuel from flowing out. Wipe and clean
spilled fuel.
To Next Page
Loading...
