Operation Section
-84-
Electronic Parking Brake
Push the front side of the parking brake
switch to engage the brake.
Push the rear side of the parking brake
switch to release the brake.
Lift Control
NOTE: To prevent a sudden change of position of
the load, operate all lift, tilt and attachment
controls smoothly.
1. Lower Position - Push the lever
FORWARD smoothly to lower the load.
2. Hold Position - When the lever is
released it will return to the HOLD or center
position. Lifting or lowering action will stop.
3. Lift Position - Pull the lever BACK
smoothly to lift the load.
Tilt Control
1. Mast Tilt Forward - Push the lever
FORWARD smoothly to tilt the mast
forward.
2. Mast Hold - When the lever is released
it will return to the HOLD or center
position. Tilting action will stop.
3. Mast Tilt Back - Pull the lever BACK
smoothly to tilt the mast backward.
Sideshift Attachment (If Equipped)
1. Sideshift Left - Push the lever
FORWARD to shift the carriage to the left.
2. Sideshift Hold - When the lever is
released it will return to the HOLD or
center position. Sideshifting action will
stop.
3. Sideshift Right - Pull the lever BACK to
shift the carriage to the right.
To Next Page
Loading...
Need help?
General
