Half/Pack
®
Issued April 2018
Body Controller Software
Copyright 2018, Heil Environmental
Printed in the U.S.A.
Body Controller Software
168
High Temperature Fault (standard equipment)
If the Hydraulic Oil temperature is greater than 180º F, then the diagnostic message will be displayed on the Insight
display.
Insight Display Illustration:
Indication: A. Hydraulic Oil over temperature warning
B. Operating Temperature Approaching Shutdown set point (180 Deg. F)
Disabled Functions: None
Fault Reset: Reduce temperature before operation.
Pump Enable PB with System Power disabled Interlock (standard equipment)
With System Power turned OFF and if the Pump Enable push button presses either from street side or from the
curb side of the dual control panel for Bank-1 Switch-1 and Bank-3 Switch-1, the diagnostic message will be
displayed in the Insight display.
Insight Display Illustration:
To Next Page
Loading...