Dräger Infinity Series User Manual

Alarms and Messages
VF4 Infinity Gamma Series Page 5-37
Message: NBP Mean Only
Parameter Value:
NBP M <value>
NBP S <***>
NBP D <***>
The patient's pulse is
too low for the monitor
to derive the systolic
and diastolic pressure
values but large
enough to report the
mean pressure value.
Improper cuff place-
ment
• Check the patient.
• Check proper place-
ment of the cuff.
Message: NBP Meas. Time-
out
Parameter value: ***
Measurement time
has exceeded 2 min-
utes.
• Repeat the measure-
ment.
Message: NBP Open Line
Parameter value: ***
There is no significant
increase in cuff pres-
sure during the infla-
tion cycle.
• Verify the cuff connec-
tion.
Message: NBP blocked Line
Parameter value: ***
There is a significant
increase in cuff pres-
sure during the infla-
tion cycle.
Blocked output condi-
tion detected. Cuff or
tubing may be
obstructed.
• Substitute cuff or tubing
if necessary.
Message: NBP Overpres-
sure
Parameter value: ***
The cuff pressure
exceeds the over-
pressure threshold.
• Call your Biomed.
Message: NBP Sys <LL
<value>
Message: NBP Sys >UL
<value>
Message: NBP Dia <LL
<value>
Message: NBP Dia >UL
<value>
Message: NBP Mean >UL
<value>
Message: NBP Mean <LL
<value>
Parameter value: <value>
The patient’s pres-
sure falls outside the
current alarm limits or
these limits are inap-
propriate for this
patient.
• Observe the patient.
• Change the current
alarm limits for this
patient.
Non-Invasive Blood Pressure (NBP) (continued)

Dräger Infinity Series Specifications

General

Manufacturer	Dräger
Device Type	Patient Monitor
Weight	5 kg to 10 kg (depending on the model and configuration)
Connectivity	Ethernet, USB, WLAN (optional)
Parameters Monitored	ECG, SpO2, NIBP, Temperature, Respiration
Alarm System	Visual and audible alarms, customizable alarm limits
Device Category	Medical Device
Series	Infinity
Display	Color TFT
Display Size	12.1 inches
Power Supply	AC Power, Internal Battery
Battery Life	Up to 4 hours (depending on configuration)