DragonWave Inc. 38
Horizon Compact Release 1.01.00 Wireless Ethernet Product User Manual – Volume 2
Required Action Steps
set cos queue mapping [x x x
x x x x x]
Assigns each of the incoming 802.1P CoS levels to either of the four
Horizon Compact CoS Queues. The Horizon Compact system
supports all eight 802.1P CoS levels (0-7).
Sequence:
set cos queue mapping [x x x x x x x x ] press Enter
where each x is a value of either 1, 2, 3 or 4 representing the
Horizon Compact CoS Queues allocated to each of the 801.1P CoS
levels (0-7) in order. Any values not explicitly assigned by the user
will not be affected by the command.
The system responds:
dot1p Queue assignment is as follows :
dot1p value CoSQueue
----------- -- ---------
0 [x]
1 [x]
2 [x]
3 [x]
4 [x]
5 [x]
6 [x]
7 [x]
Where [x] is a value of either 1, 2, 3 or 4
Examples:
set cos queue mapping [1 1 2 2 3 3 3 4 ] press Enter
will allocate 802.1P CoS levels 0-1 to Horizon Compact CoS Queue
1, CoS levels 2-3 to Horizon Compact CoS Queue 2 CoS levels 4-6.
to Horizon Compact CoS Queue 3 and CoS level 7 to Horizon
Compact CoS Queue 4. Note that there is a space between each of
the digits in the command.
The system responds:
cos queue assignment is as follows :
dot1p value CoSQueue
----------- -- ---------
0 1
1 1
2 2
3 2
4 3
5 3
6 3
7 4
To Next Page
Loading...