VigorSwitch G2080 User’s Guide
10
The same VLAN members could not be in different switches.
Every VLAN members could not access VLAN members each other.
The switch manager has to assign different names for each VLAN groups
at one switch.
Case 3: Port-based VLAN - 2
VLAN1 members could not access VLAN2, VLAN3 and VLAN4 members.
VLAN2 members could not access VLAN1 and VLAN3 members, but they could access
VLAN4 members.
VLAN3 members could not access VLAN1, VLAN2 and VLAN4.
VLAN4 members could not access VLAN1 and VLAN3 members, but they could
access VLAN2 members.
Case 4: The same VLAN members can be at different switches with the same VID
To Next Page
Loading...
Need help?
General