VigorSwitch G2080 User’s Guide
74
normal registrar, fixed registrar and forbidden registrar,
provided for the user’s choice.
Normal - It is Normal Registration. The Registrar responds
normally to incoming GARP messages. The default setting
is Normal.
Fixed - It is Registration Fixed. The Registrar ignores all
GARP messages, and all members remain in the registered
(IN) state.
Forbidden - It is Registration Forbidden. The Registrar
ignores all GARP messages, and all members remain in the
unregistered (EMPTY) state.
Restricted Mode: This function is used to restrict dynamic VLAN be created
when this port received GVRP PDU. There are two modes,
disable and enable, provided for the user’s choice.
Disabled - In this mode, the switch dynamic VLAN will be
created when this port received GVRP PDU. The default
setting is Normal.
Enabled - In this mode, the switch does not create dynamic
VLAN when this port received GVRP PDU. Except received
dynamic VLAN message of the GVRP PDU is an existed
static VLAN in the switch, this port will be added into the
static VLAN members dynamically.
To Next Page
Loading...
Need help?
General