DRESSTA 560C - Tires; Rims; Loader Hydraulic System; Cycle Times

SECTION 6 SPECIFICATIONS
Page 18
OM560C99/1E DRESSTA
SPECIFICATIONS
6.8.8. TIRES
Standard-tubeless......................................................................................................29.5-29 22 PR L4
Optional-tubeless.......................................................................................................29.5 R29 ZRD 1A
Optional-tubeless.......................................................................................................29.5-29 34 PR L3
Optional-tubeless......................................................................................................6535-33 24 PR L5
Optional-tubeless.......................................................................................................6535-33 30PR L4
Optional-tubeless.......................................................................................................6535-33 24PR L4
INFLATION PRESSURE [Mpa]
Front wheels ....................................................................................................................................0.35
Rear wheels.....................................................................................................................................0.35
6.8.9. RIMS
Size..........................................................................................................................................25 x 29.5
6.8.10. BRAKES
Service brakes .................................................. multi-disc wet inboard
Control............................................................... hydraulic
Parking brake
Type .................................................................. disc type on front axle
Control............................................................... spring applied
Hydraulically ..................................................... released
6.8.11. LOADER HYDRAULIC SYSTEM
Main control valve
Standard............................................................ 2-spool
Optional............................................................. 3-spool
Pilot control valve
Standard............................................................ 2-spool
Optional............................................................. 3-spool
6.8.12. CYCLE TIMES
Boom raise......................................................................................................................................9.1 s
Boom lower.....................................................................................................................................9.3 s
Bucket dump...................................................................................................................................2.8 s
35° articulation ................................................................................................................................1.5 s
6.8.13. FUEL CONSUMPTION
During tests consisting in intensive operation of a loader in excavation, sandy soil (bulk density 1.6
t/cu. m) the average fuel consumption is app. 70 l/h.
AVERAGE FUEL CONSUMPTION IN OPERATION
Specified above fuel consumption is for short intensive operation of the machine. Practically,
considering longer periods of operation, fuel consumption is much lower and for medium intensive
operation is app. 50 l/h.