OPERATING SECTION 4
Page 39
DRESSTA OM560C99/1E
LOADER TECHNIQUES
Fig. 4.32. Loading Sequence
Transport filled bucket in the roll back position raised approximately 0.5 meter above the ground. A
loaded bucket must never be transported in the fully raised position. Keep the travel speed
reasonable for safe operation. Upon reaching the truck, raise the bucket high enough to clear the
truck body, Fig. 4.33. Dump load slowly to reduce the shock of weight transfer to the rear axle when
the bucket is emptied. Shake bucket only to loosen dirt from within.
WARNING! Transport loads with bucket in carry position only. A loaded bucket
must never be transported in the fully raised boom or with boom in horizontal
position.
To Next Page
Loading...