Dimmering
This function allows adjusting the backlighting
intensity.
●
Use (1) and (2) (Fig 135) from the
Interactive Menu to select the menu
item and press ENTER (3).
●
Select the Backlight item and press ENTER (3).
●
Select the Dimmering item and press ENTER (3).
Levels from 100% to 20% are displayed in the middle.
While the currently set level is shown on the right.
The backlight is automatically adjusted according to
the ambient light detected by the instrument panel.
The backlighting intensity adjustment is calculated
in relation to what is detected by the instrument
panel.
Using the joystick
it is possible to scroll and
select the desired mode. Press ENTER to confirm.
Fig 138
160
To Next Page
Loading...
