Pairing of a new device (PAIRING)
To pair a new Bluetooth device enter the SETTING
MENU, use (1) or (2) to select the
"BLUETOOTH" option and press (4).
Upon entering the function, use (1) and (2) to
select the "PAIRING" item with flashing frame and
press (4) (Fig 139).
Make sure that the Bluetooth device that you
wish to pair to the instrument panel has the
Bluetooth option on and that is “visible” to other
devices. Refer to the device instructions.
Successively, the instrument panel searching
for Bluetooth devices that are near the motorbike
displaying the message “WAIT...” and 2 flashing
dashes “- - “ during the search. (Fig 140)
The search phase will take a few seconds.
Fig 139
Fig 140
145
To Next Page
Loading...
