Operating Instructions For TD/TAD4 Dual Fuel Burner
June 13 3 of 165 TD/TAD4 Manual Rev 4
`TD/TAD` SERIES DUAL FUEL BURNERS
GENERAL INFORMATION AND OPERATING MANUAL
IMPORTANT
Throughout this publication Dunphy Combustion Limited are referred to as `The Company`.
The manual, which is supplied with every burner, should be read prior to the installation of the unit.
While giving information on the site work involved and on the burner commissioning procedure,
the content cannot include all of the data which may be necessary to achieve the design output of a
burner to a particular appliance because of the wide variety of heating and process plant for which
the burner is suitable precludes this.
The Company strongly advises that the commissioning of the burners is carried out by Dunphy
trained engineers and points out that it may be impossible to impart all the necessary information to
enable others to do so.
Under all circumstances the provisions of The Health and Safety at Work Act 1974 are the most
important consideration and if any doubts exist concerning the safe operation of the burner, The
Company should be contacted for advice. This provision also applies to the legislation of countries
to which the burners may be exported.
Where equipment, not of The Company`s supply, is used in conjunction with the burners, reference
should be made to specific instructions or regulations governing the installation and use of such
equipment.
The Company gratefully acknowledges the permission of component suppliers and others to
reproduce data sheets and technical information in this manual.
For reliable and efficient operation of the burner, it is essential that regular maintenance is carried
out in accordance with the instructions contained in the text of this manual. The fact that a burner
may be under warranty does not absolve the user from the responsibility for this and inadequate
maintenance may lead to claims, made under guarantees of materials or performance being denied
IF IN DOUBT - ASK!
Information contained in this manual is given without any responsibility on the part of the company
for the consequences of the actions of persons making use of such information.
Equipment is supplied strictly under the terms of The Company’s current `Conditions of Supply`
which are printed on the reverse of order acknowledgements and delivery notes.
Copies are available on request.
To Next Page
Loading...