- 64 -
Status
: Paper remains in the DC-CC1.
Countermeasure
: Remove the jammed paper in the DC-CC1
and press the STOP key to clear the error.
Status
: A paper jam has occurred in the DC-CC1.
Countermeasure
: Remove the jammed paper in the DC-CC1
and press the STOP key on the stacker to clear the error.
Status
: Finished sheet which length in the paper feed direction
is above 370mm is ejected to the DC-CC1.
Countermeasure
: Set the length of paper to be ejected to the
DC-CC1 to 370mm or less. Press the STOP key on the
stacker to clear the error,
Status
: A paper jam has occurred in the DC-CC1 and caused
motor lock.
Countermeasure
: Remove the jammed paper in the DC-CC1
and press the STOP key on the stacker to clear the error.
Paper in
machine
Remove document
from cross area.
Paper in cross
Paper in
machine
Remove document
from cross area
STR