- 67 -
2 ABC
5 JKL MNO
TUV WXYZ
3
6
8
9
0
SET
DEF
2
ABC
5
JKL MNO
TUV WXYZ
3
6
8
9
0
SET
DEF
Paper in m
Remove document
from conveyer
J1:Conveyer F
3. When a Paper Jam Has Occurred
When a paper jam has occurred and the unit has stopped, the LCD panel displays the paper jam
area. Follow the procedures below to remove the jammed paper.
When a paper jam has occurred in the anterior part of DC-SC1, “J1:Conveyer F” “Remove
document from conveyer” error is displayed and paper jam area flashes on the LCD panel.
Remove the document with the following procedures.
1. “J1:Conveyer F” error is displayed on the LCD panel.
2. Press the JOG key to eject the document
in the conveyer area F to the reject area.
3. Press the STOP key to clear the error.
The unit is reset and the error message is cleared.
WARNING
When removing the jammed paper, make sure that the unit fully stops.
If it is hard to remove the jammed paper from the unit, use pliers for removing.
3-1. When a paper jam has occuured in conveyer area F
To Next Page
Loading...
Need help?
General
